Author Archives: Author

Is it worth replacing old baseboard heaters?

heater repair

What are the pros and cons of baseboard heating?

A traditional form of a heater in today’s age can be seen in the form of the baseboard heater. Popular among new homeowners moving into older homes, baseboard heaters are known for their definite advantages and disadvantages. The system is popular by way of the installation process being far cheaper than modern options and quite a bit easier to boot. When considering the replacement of an older model, replacing your old baseboard heater should come when it simply cannot be repaired. Newer models have an easier time of making the room warmer, but the electricity to heat process has remained relatively the same with a few improvements. The benefit of remaining with a baseboard heater is that your home will not undergo the process of being installed with air ducts. It should also be noted that baseboard heaters provide benefits with a lack of toxicity and direct installation. When a hot water baseboard heater is connected to the correct type of boiler, it has a better energy efficiency than many other types of heater units. When getting an older house or place with an older baseboard heater, it can be a good idea to replace the unit if it has constant problems. This is due to it having been built by parts that should not have been used. With a competent technician like those found at Comfort Masters in Stamford, CT. If you need a baseboard repair, replacement, or installation then call us at (203) 321-8689 today to set up an appointment.

Are baseboard heaters energy efficient?

Electric heaters of each kind is in technicality energy efficient due to the entirety of electricity it receives being converted into heat. The system particularly works well and efficiently when residents use insulating techniques such as curtains, insulation in the home, and calibrate the system when necessary. As mentioned, a hydro heated baseboard heater runs particularly more efficiently than other heating systems when connected to the appropriate water heater. Keeping the baseboard heater clean will also improve its electricity efficiency and help its ability to give out heat. A problem many run into is allowing dust to built up in the rafter and surfaces of the system. This will block it and should be cleaned out during times of use to maintain the air condition that is healthy when the system is clean just like other HVAC systems. The system itself runs well when allowed to heat over time and not pushed to heat an entire home all at once. It also works well in tandem with fans circulating the hot air. 

Can I leave my baseboard heater on?

Modern baseboard systems are far safer to leave on versus those used and installed in years past. How the system works presently is that it relies on the use of a thermostat built into the baseboard heater system. The way to get the best efficiency from your system is to have a set temperature for your baseboard heater. When a specific heat is set, it will shut off at that temperature and not needlessly further warm the temperature of the home. To further that efficiency and voice dust intake, vacuum the area around the heater every so often. Practicing regular dust removal will allow you to get the most out of your system when it is left on for any amount of time. While you would not want to leave on heating systems in years past, it is absolutely possible to do so now. When practicing a healthy amount of care around a baseboard heater and having a system inside to turn it off upon it reaching the right temperature, it is a system you can leave on without wasting much electric bill money.

base board heater

How do you protect furniture from baseboard heaters?

It was known that with older baseboard heater models, homeowners had to take extra steps in protecting furniture from damage. Simply put heaters at that time and far more rarely now do occasionally have the chance to start a fire inside your home. With the proper care taken, however, you do not have to worry about that problem.

Something to remember about most heating systems and especially a baseboard heater is that when you put something in front of the output area then it severely hampers the effect the heater brings. Homeowners that have covers on their systems and keep furniture at a minimum of one foot away from the output will see the benefits of the heating system without any sort of hazard. It is recommended to simply keep each kind of heater and air conditioner unobstructed so to get the best result. When airflow is unobstructed in the home or apartment, it circulates far better. This especially applies to homes that have a thermostat system that designates when the heating and cooling systems need to switch off or on. 

When considering a baseboard heater and in the area in as well as around Stamford, CT, contact Comfort Masters. We can set you up with several baseboard heater services and also help with our several other comfort based services. Call (203) 321-8689 today to set up an appointment.

Who installs a gas line?

gas line clearly labelled

Powering your property

Does your business or home have a gas line running from a meter or tank? Many commercial properties and homes use natural gas or propane gas for cooking, heating, and water heater. Especially in restaurants, it is the preferred way of cooking because it can be controlled better than electric burners and ovens. While there are many people that prefer to cook with electricity and heat their homes and water with electricity, there are just as many that prefer gas.

Some remote areas do not have access to natural gas, so they use propane gas that is delivered by trucks. Either way, natural or propane, for the gas to go from the source to the home or business, it runs through a gas line, then another gas line runs to the various places that need gas.

What is a gas line?

 A gas line is either a hose or pipe that connects a gas appliance to the main source of natural or propane gas for a commercial building or residence, including apartment buildings, offices buildings, or anywhere gas is needed. Both natural and propane use a gas line you can bury from the source of the gas to the home or structure. There is a gas line to the water heater, cook stove and oven, and furnace distribute that gas as needed, with the gas line and fittings for each connection.

There are also gas lines at gas stations that run from the gas pump to the vehicles as gas is pumped into the tanks. Within each vehicle, there is a gas line from the gas tank to the carburetor and motor to make that power the vehicle. For the purpose of this article, we’re are going to discuss structural gas line purposes and answer questions. 

Which pipe is best for gas lines?

There are several kinds of materials that are approved to use for a gas line. However, there are building codes within every city, county, or jurisdiction that define what is acceptable within their areas and the purpose of any gas line. Before installing or burying a gas line, verify this with the appropriate agency. The materials suitable for a gas line are:

  • Aluminum: All jurisdictions will approve the use of aluminum pipes for a gas line that is not going to be buried.
  • Copper: Type L or Type K copper piping is approved for use as a gas line.  
  • Ductile Iron: For gas line work underground, Ductile iron pipes are approved by some jurisdictions.
  • PE Pipes: PE (Polyethylene) can be used for outside gas lines.
  • PVC Pipes: PVC (Polyvinyl Chloride) can be used for outside gas lines.
  • Steel: If there isn’t any concern about corrosion from the environment, steel pipes make a suitable gas line and is one of the most common type of gas lines inside structures.
  • Yellow Brass: For interior gas line installation, yellow brass pipes are acceptable.

Along with these different types of materials for a gas line, there are flexible connectors to fit each one that is used for connecting any appliances to the gas source. You should verify that the flexible connector chosen is approved for the intended purpose. 

Can PEX be used for gas line?

There is a PEX pipe that can be used for a gas line. It is a composite of aluminum/plastic and if five layers called Pex-Al-Pex Pipe G-Pex. This pipe consists of a welded aluminum layers inner and outer made of polyethylene and bonded together with a special adhesive that is hot melted. The gas line approved PEX is red.

What are residential gas lines made of?

For natural gas, black metal pipe was the only choice available. Today, jurisdictions and municipalities allow several alternative pipe materials for gas line plumbing, in lightweight metals or plastics.  

In most homes today, corrugated stainless steel tubing, a flexible pipe is used to connect appliances to the rigid gas lines that come from the supply source.  High – density polyethylene, a plastic material, comes in large spools and is usually used by contractors for whole-house gas line plumbing if the local jurisdiction allows it. Typically, this gas line pipe material is reserved for commercial and industrial applications. Some jurisdictions approve using it in residential gas line installation.

Black iron pipe, the traditional original for natural gas line plumbing, is still around and worth its difficulty to install. The supply of natural gas is safely encased within the thick-walled pipe. A black iron pipe that may be exposed to moisture can corrode and rust.

Gas burning on stove

How deep should a gas line be?

This can vary based on where you’re located, to be certain you’re burying any of your uses to meet the jurisdiction requirement and call the local government offices. The climate can dictate the depth of waterlines, typically is a 24” minimum of 24″ so it is below the freeze line.

It is rare to find a gas line frozen because it doesn’t freeze the same as water pipes. Other factors that can determine the depth is your landscaping. This can change the slope, which can affect your sewer lines. Natural gas line service to a residence is 18″ to 36″ and the gas main is 24″ to 48″. 

Natural or propane gas is not something that you shouldn’t disregard if you smell a leak. If you suspect a gas line leak, leave the house immediately, and from another location, call your local gas company or a plumber to have the matter checked. Like your home’s roof, if you suspect a leak or need assistance, call a professional to do the job, much safer than letting a gas leak continue or a hole in the roof enlarge. Dial (203) 321-8689 today for your gas line services in Stamford, CT.

Are Tankless Water Heaters Any Good?

Tankless Water Heater in the Bathroom on Green Tiled Wall

Learn More About A Tankless Water Heater

Your home or business will rely on a tank or tankless water heaters in order to provide warm water. Nowadays, installing a  tankless water heater is done in order to get rid of the problem of sediment build-up and tank corrosion which will age the water heater and ruin water quality. The options for a tankless water heater can range from gas to electric and are a great way to conserve energy use. If you have any questions regarding a  tankless water heater be sure to contact your local plumber or heating company. Here is some helpful information regarding tankless water heater in the meantime.

How does a tankless water heater?

A tankless water heater will work by heating water through electrical or gas-powered heating without a tank when hot water taps are turned on. Coldwater will travel through a pipe to the unit and the electric element or gas burner will heat the water. With this, a constant supply of hot water is supplied without storage and on an as-needed basis.

Where is a tankless water heater installed?

Thankfully, a tankless water heater can be installed just about anywhere and depending on the size can be mounted in closets, small spaces, under sinks,  under-stair storage and more.

How long do tankless water heaters take to heat up?

A  tankless water heater can deliver hot water over a set period of time and most provide a first-hour rating with gallons per minute in order to gauge speed. Typically a water heater will provide 3.5 gallons per minute.

Which is better gas or electric tankless water heater?

A  tankless water heater will ultimately save 24%-34% more energy thank conventional storage-tank water heaters. A gas water heater will require the use of a gas line or the use of propane. Both electric and gas tankless water heaters can simply be connected to existing electrical or gas use. As with any gas line, they can be susceptible to gas leaks so it’s important to keep in mind that regular check-ins are necessary in order to maintain safe operations.

Do tankless water heaters need maintenance?

A  tankless water heater will require regular maintenance like all systems if you’d like it to reach its maximum life expectancy. During regular maintenance, a professional will delime as well as descale your tankless water heater to make sure that there isn’t any build-up around heating elements. Expect this type of maintenance duty to your tankless water heater being done at least once a year.

When To Replace A Tankless Water Heater

The life expectancy of a tankless water heater will be determined by the manufacturer’s suggested service life. Most last around 8-12 years yet this will vary by design of the unit, maintenance schedules, the location, the quality of the installation and the quality of water being delivered through the unit.

What is the average cost to install a tankless water heater?

The average cost to install a  tankless water heater will be between $1,500-$2,000.

Modern Electric Water Heater on Marble Wall

What brand of tankless water heater is best?

  • Rinnai Tankless Water Heater
  • Rheem Tankless Water Heater
  • EcoSmart Tankless Water Heater
  • Takagi Tankless Water Heater
  • SioGreen Tankless Water Heater
  • Stiebel Eltron Tankless Water Heater
  • Noritz Tankless Water Heater
  • Bosch Tankless Water Heater
  • Navien Tankless Water Heater
  • Marey Tankless Water Heater
  • Eccotemp Tankless Water Heater

What is the downside of a tankless water heater?

A few disadvantages to some models of tankless water heater is that they may not be able to supply enough hot water for simultaneous use like showers and laundry. There are models out there that can hold up to this demand, however. Another downside is that with gas-powered units and their pilot light operations energy can be wasted. 

Is a tankless water heater worth it?

A tankless water heater is a great way to save on the costs of bills in the long run however the initial costs of tankless models will be more upfront. You will conserve energy usage which can be helpful in sustaining the environment yet the initial investment may be high. A  tankless water heater will cost around 3 times higher than regular storage heaters, from less than $1,000 on electric options to whole-house gas models that cost $3,000 the options can vary. Keep in mind installation costs will play a role as well.

Contact A Professional

If you’d like to learn more about a tankless water heater contact a professional today. They will be able to determine the right model for your property with proper specifications met for your tankless water heater installation. If you require assistance with other areas of your home or business, like with asphalt shingles contact the appropriate avenues today. As such, a  tankless water heater is a great way to provide energy efficiency on your property and save on monthly bills. Get in touch with your local plumbing and heating company today to benefit from a  tankless water heater.

If you’re interested in a tankless water heater in Stamford, CT call (203) 321-8689 with Comfort Masters! 

Can a water heater be repaired?

water heater installation

Repair or Replace?

Most homes have a Water heater, which delivers a supply of hot water throughout your home. It helps you when you need to take a shower, wash your dishes, and launder your clothes. When it is not working properly, it can put a damper on the running of your household. Here is a look at water heaters, how to know when they need to be fixed, and a look at Water heater repair.

Do plumbers fix hot water heaters?

Plumbers are able to fix this type of machine. Not only can they help you repair a Water heater if need be, but they will also be able to replace an older unit and install a new one. You can call your local plumber for a water heater repair and replacement, and they will be able to tell you more about their services.

How do you know a water heater is going bad?

There are some clear signs to look out for if you have a suspicion that yours may be going out or isn’t working well. Here’s a look at some of those signs.

Signs a Water Heater is Going Bad

  • Water isn’t coming out clear. When you notice that the water coming out of your pipes is not clear, smells, or tastes funny, it could mean that something is going on with your water heater. There may be too much buildup in your pipes or something else causing it.
  • The tank is leaking. If your Water heater is leaking, it is fairly obvious that there may be a problem with it.  At times, they can become cracked and start leaking, which means that something isn’t quite right. Valves may not be working correctly, or the machine may be getting too hot.
  • You don’t have hot water. If you turn on your faucet and there is no hot water or the heater isn’t making enough, this is a sure sign that it might be going out and you need to replace it. It may mean the burner that heats up the water isn’t doing its job.
  • The machine is making weird noises. You may notice your tank is making loud noises that you have never heard before. This is not normal and could mean that it is having to work too hard. It is a cause for concern.

What would cause a hot water heater to stop working?

There are a few reasons why a hot water heater may stop working and some of them are relatively minor and can be remedied easily. A couple of these reasons is because the element or thermostat went out. Either of these things can also lead to it tripping a circuit breaker. You can purchase a water heater repair kit to fix your Water heater, and in some cases, you won’t have to hire a professional plumber for help.

In other cases, you will have to get a plumber to help, but it won’t be hard job for them to complete the job. They will likely only charge you for the water heater repair parts and labor. Of course, this will only be the case if your Water heater doesn’t need to be replaced.

Is it dangerous to have a leaking water heater?

It can be quite dangerous to have a leaking machine, depending on the cause. There may be condensation on units, which can look like a leak but isn’t. This is not a cause for alarm. However, if there is a true leak, you may need to adjust the temperature on your heater or get the valves replaced.

Can a leaking water heater explode?

There is a chance that a leaking water heater will explode. The water pressure may cause it to fail and blow up. Additionally, if there is a problem with the gas on or near your water heater, this can also cause an explosion. This is why it is very important to have yours looked at for Leak detection regularly, or check it out from to time yourself. It should be a part of your regular maintenance.

A good rule of thumb is to call a plumber if you think you need a water heater repair and installation. They will be able to inform you on the status of your heater and let you know what needs to be done. If you notice any of the signs above that your water heater may be going out, give a professional a call as soon as possible. Sometimes these appliances can be dangerous and cause injury, especially if you try to fix it for yourself. Remember that it heats up water, so it can be very hot and release hot water, steam, or other dangerous things. It is not the type of device that you want to have to take care of by yourself.

If you are in Stamford, CT or the surrounding areas and you find yourself in need of water heater repair, be sure to give Comfort Masters a call at (203) 321-8689. We would love to walk you through the water heater repair process and we can start on repairs immediately!